Block Device Drivers

Lab objectives

  • acquiring knowledge about the behavior of the I/O subsystem on Linux
  • hands-on activities in structures and functions of block devices
  • acquiring basic skills for utilizing the API for block devices, by solving exercises

Overview

Block devices are characterized by random access to data organized in fixed-size blocks. Examples of such devices are hard drives, CD-ROM drives, RAM disks, etc. The speed of block devices is generally much higher than the speed of character devices, and their performance is also important. This is why the Linux kernel handles differently these 2 types of devices (it uses a specialized API).

Working with block devices is therefore more complicated than working with character devices. Character devices have a single current position, while block devices must be able to move to any position in the device to provide random access to data. To simplify work with block devices, the Linux kernel provides an entire subsystem called the block I/O (or block layer) subsystem.

From the kernel perspective, the smallest logical unit of addressing is the block. Although the physical device can be addressed at sector level, the kernel performs all disk operations using blocks. Since the smallest unit of physical addressing is the sector, the size of the block must be a multiple of the size of the sector. Additionally, the block size must be a power of 2 and can not exceed the size of a page. The size of the block may vary depending on the file system used, the most common values being 512 bytes, 1 kilobytes and 4 kilobytes.

Register a block I/O device

To register a block I/O device, function register_blkdev() is used. To deregister a block I/O device, function unregister_blkdev() is used.

Starting with version 4.9 of the Linux kernel, the call to register_blkdev() is optional. The only operations performed by this function are the dynamic allocation of a major (if the major argument is 0 when calling the function) and creating an entry in /proc/devices. In future kernel versions it may be removed; however, most drivers still call it.

Usually, the call to the register function is performed in the module initialization function, and the call to the deregister function is performed in the module exit function. A typical scenario is presented below:

#include <linux/fs.h>

#define MY_BLOCK_MAJOR           240
#define MY_BLKDEV_NAME          "mybdev"

static int my_block_init(void)
{
    int status;

    status = register_blkdev(MY_BLOCK_MAJOR, MY_BLKDEV_NAME);
    if (status < 0) {
             printk(KERN_ERR "unable to register mybdev block device\n");
             return -EBUSY;
     }
     //...
}

static void my_block_exit(void)
{
     //...
     unregister_blkdev(MY_BLOCK_MAJOR, MY_BLKDEV_NAME);
}

Register a disk

Although the register_blkdev() function obtains a major, it does not provide a device (disk) to the system. For creating and using block devices (disks), a specialized interface defined in linux/genhd.h is used.

The useful functions defined in linux/genhd.h are to register /allocate a disk, add it to the system, and de-register /unmount the disk.

The alloc_disk() function is used to allocate a disk, and the del_gendisk() function is used to deallocate it. Adding the disk to the system is done using the add_disk() function.

The alloc_disk() and add_disk() functions are typically used in the module initialization function, and the del_gendisk() function in the module exit function.

#include <linux/fs.h>
#include <linux/genhd.h>

#define MY_BLOCK_MINORS       1

static struct my_block_dev {
    struct gendisk *gd;
    //...
} dev;

static int create_block_device(struct my_block_dev *dev)
{
    dev->gd = alloc_disk(MY_BLOCK_MINORS);
    //...
    add_disk(dev->gd);
}

static int my_block_init(void)
{
    //...
    create_block_device(&dev);
}

static void delete_block_device(struct my_block_dev *dev)
{
    if (dev->gd)
        del_gendisk(dev->gd);
    //...
}

static void my_block_exit(void)
{
    delete_block_device(&dev);
    //...
}

As with character devices, it is recommended to use my_block_dev structure to store important elements describing the block device.

Note that immediately after calling the add_disk() function (actually even during the call), the disk is active and its methods can be called at any time. As a result, this function should not be called before the driver is fully initialized and ready to respond to requests for the registered disk.

It can be noticed that the basic structure in working with block devices (disks) is the struct gendisk structure.

After a call to del_gendisk(), the struct gendisk structure may continue to exist (and the device operations may still be called) if there are still users (an open operation was called on the device but the associated release operation has not been called). One solution is to keep the number of users of the device and call the del_gendisk() function only when there are no users left of the device.

struct gendisk structure

The struct gendisk structure stores information about a disk. As stated above, such a structure is obtained from the alloc_disk() call and its fields must be filled before it is sent to the add_disk() function.

The struct gendisk structure has the following important fields:

  • major, first_minor, minor, describing the identifiers used by the disk; a disk must have at least one minor; if the disk allows the partitioning operation, a minor must be allocated for each possible partition
  • disk_name, which represents the disk name as it appears in /proc/partitions and in sysfs (/sys/block)
  • fops, representing operations associated with the disk
  • queue, which represents the queue of requests
  • capacity, which is disk capacity in 512 byte sectors; it is initialized using the set_capacity() function
  • private_data, which is a pointer to private data

An example of filling a struct gendisk structure is presented below:

#include <linux/genhd.h>
#include <linux/fs.h>
#include <linux/blkdev.h>

#define NR_SECTORS                   1024

#define KERNEL_SECTOR_SIZE           512

static struct my_block_dev {
    //...
    spinlock_t lock;                /* For mutual exclusion */
    struct request_queue *queue;    /* The device request queue */
    struct gendisk *gd;             /* The gendisk structure */
    //...
} dev;

static int create_block_device(struct my_block_dev *dev)
{
    ...
    /* Initialize the gendisk structure */
    dev->gd = alloc_disk(MY_BLOCK_MINORS);
    if (!dev->gd) {
        printk (KERN_NOTICE "alloc_disk failure\n");
        return -ENOMEM;
    }

    dev->gd->major = MY_BLOCK_MAJOR;
    dev->gd->first_minor = 0;
    dev->gd->fops = &my_block_ops;
    dev->gd->queue = dev->queue;
    dev->gd->private_data = dev;
    snprintf (dev->gd->disk_name, 32, "myblock");
    set_capacity(dev->gd, NR_SECTORS);

    add_disk(dev->gd);

    return 0;
}

static int my_block_init(void)
{
    int status;
    //...
    status = create_block_device(&dev);
    if (status < 0)
        return status;
    //...
}

static void delete_block_device(struct my_block_dev *dev)
{
    if (dev->gd) {
        del_gendisk(dev->gd);
    }
    //...
}

static void my_block_exit(void)
{
    delete_block_device(&dev);
    //...
}

As stated before, the kernel considers a disk as a vector of 512 byte sectors. In reality, the devices may have a different size of the sector. To work with these devices, the kernel needs to be informed about the real size of a sector, and for all operations the necessary conversions must be made.

To inform the kernel about the device sector size, a parameter of the request queue must be set just after the request queue is allocated, using the blk_queue_logical_block_size() function. All requests generated by the kernel will be multiple of this sector size and will be aligned accordingly. However, communication between the device and the driver will still be performed in sectors of 512 bytes in size, so conversion should be done each time (an example of such conversion is when calling the set_capacity() function in the code above).

struct block_device_operations structure

Just as for a character device, operations in struct file_operations should be completed, so for a block device, the operations in struct block_device_operations should be completed. The association of operations is done through the fops field in the struct gendisk structure.

Some of the fields of the struct block_device_operations structure are presented below:

struct block_device_operations {
    int (*open) (struct block_device *, fmode_t);
    int (*release) (struct gendisk *, fmode_t);
    int (*locked_ioctl) (struct block_device *, fmode_t, unsigned,
                         unsigned long);
    int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
    int (*compat_ioctl) (struct block_device *, fmode_t, unsigned,
                         unsigned long);
    int (*direct_access) (struct block_device *, sector_t,
                          void **, unsigned long *);
    int (*media_changed) (struct gendisk *);
    int (*revalidate_disk) (struct gendisk *);
    int (*getgeo)(struct block_device *, struct hd_geometry *);
    struct module *owner;
}

open() and release() operations are called directly from user space by utilities that may perform the following tasks: partitioning, file system creation, file system verification. In a mount() operation, the open() function is called directly from the kernel space, the file descriptor being stored by the kernel. A driver for a block device can not differentiate between open() calls performed from user space and kernel space.

An example of how to use these two functions is given below:

#include <linux/fs.h>
#include <linux/genhd.h>

static struct my_block_dev {
    //...
    struct gendisk * gd;
    //...
} dev;

static int my_block_open(struct block_device *bdev, fmode_t mode)
{
    //...

    return 0;
}

static int my_block_release(struct gendisk *gd, fmode_t mode)
{
    //...

    return 0;
}

struct block_device_operations my_block_ops = {
    .owner = THIS_MODULE,
    .open = my_block_open,
    .release = my_block_release
};

static int create_block_device(struct my_block_dev *dev)
{
    //....
    dev->gd->fops = &my_block_ops;
    dev->gd->private_data = dev;
    //...
}

Please notice that there are no read or write operations. These operations are performed by the request() function associated with the request queue of the disk.

Request queues

Drivers for block devices use queues to store the block I/O requests that will be processed. A request queue is represented by the struct request_queue structure. The request queue is made up of a double-linked list of requests and their associated control information. The requests are added to the queue by higher-level kernel code (for example, file systems). As long as the request queue is not empty, the queue’s associated driver will have to retrieve the first request from the queue and pass it to the associated block device. Each item in the request queue is a request represented by the struct request structure.

Request queues implement an interface that allows the use of multiple I/O schedulers. A scheduler must sort the requests and present them to the driver in order to maximize performance. The scheduler also deals with the combination of adjacent requests (which refer to adjacent sectors of the disk).

Create and delete a request queue

A request queue is created with the blk_init_queue() function and is deleted using the blk_cleanup_queue() function.

An example of using these functions is as follows:

#include <linux/fs.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>

static struct my_block_dev {
    //...
    struct request_queue *queue;
    //...
} dev;

static void my_block_request(struct request_queue *q);
//...

static int create_block_device(struct my_block_dev *dev)
{
    /* Initialize the I/O queue */
    spin_lock_init(&dev->lock);
    dev->queue = blk_init_queue(my_block_request, &dev->lock);
    if (dev->queue == NULL)
        goto out_err;
    blk_queue_logical_block_size(dev->queue, KERNEL_SECTOR_SIZE);
    dev->queue->queuedata = dev;
    //...

out_err:
    return -ENOMEM;
}

static int my_block_init(void)
{
    int status;
    //...
    status = create_block_device(&dev);
    if (status < 0)
        return status;
    //...
}

static void delete_block_device(struct block_dev *dev)
{
    //...
    if (dev->queue)
        blk_cleanup_queue(dev->queue);
}

static void my_block_exit(void)
{
    delete_block_device(&dev);
    //...
}

The blk_init_queue() function receives as first argument a pointer to the function which processes the requests for the device (of type request_fn_proc). In the example above, the function is my_block_request(). The lock parameter is a spinlock (initialized by the driver) that the kernel holds during the request() function call to ensure exclusive access to the queue. This spinlock can also be used in other driver functions to protect access to shared data with the request() function.

As part of the request queue initialization, you can configure the queuedata field, which is equivalent to the private_data field in other structures.

Useful functions for processing request queues

The function of type request_fn_proc is used to handle requests for working with the block device. This function is the equivalent of read and write functions encountered on character devices. The function receives the request queue associated with the device as an argument and can use various functions for processing the requests from the request queue.

The functions used to process the requests from the request queue are described below:

  • blk_peek_request() - retrieves a reference to the first request from the queue; the respective request must be started using blk_start_request();
  • blk_start_request() - extracts the request from the queue and starts it for processing; in general, the function receives as a reference a pointer to a request returned by blk_peek_request();
  • blk_fetch_request() - retrieves the first request from the queue (using blk_peek_request()) and starts it (using blk_start_request());
  • blk_requeue_request() - to re-enter queue.

Before calling any of the functions above, the spinlock associated to the queue must be acquired. If the function is called from the function of type request_fn_proc, then the spinlock is already held.

Requests for block devices

A request for a block device is described by struct request structure.

The fields of struct request structure include:

  • cmd_flags: a series of flags including direction (reading or writing); to find out the direction, the macrodefinition rq_data_dir is used, which returns 0 for a read request and 1 for a write request on the device;
  • __sector: the first sector of the transfer request; if the device sector has a different size, the appropriate conversion should be done. To access this field, use the blk_rq_pos macro;
  • __data_len: the total number of bytes to be transferred; to access this field the blk_rq_bytes macro is used;
  • generally, data from the current struct bio will be transferred; the data size is obtained using the blk_rq_cur_bytes macro;
  • bio, a dynamic list of struct bio structures that is a set of buffers associated to the request; this field is accessed by macrodefinition rq_for_each_segment if there are multiple buffers, or by bio_data macrodefinition in case there is only one associated buffer;

We will discuss more about the struct bio structure and its associated operations in the bio_structure section.

Create a request

Read /write requests are created by code layers superior to the kernel I/O subsystem. Typically, the subsystem that creates requests for block devices is the file management subsystem. The I/O subsystem acts as an interface between the file management subsystem and the block device driver. The main operations under the responsibility of the I/O subsystem are adding requests to the queue of the specific block device and sorting and merging requests according to performance considerations.

Finish a request

When the driver has finished transferring all the sectors of a request to /from the device, it must inform the I/O subsystem by calling the blk_end_request() function. If the lock associated to the request queue is already acquired, the __blk_end_request() function can be used.

If the driver wants to close the request even if it did not transfer all the related sectors, it can call the blk_end_request_all() or __blk_end_request_all() function. The __blk_end_request_all() function is called if the lock associated to the request queue is already acquired.

Process a request

The central part of a block device driver is the request_fn_proc function type. In previous examples, the function that fulfilled this role was my_block_request(). As stated in the Create and delete a request queue section, this function is associated to the driver by calling blk_init_queue() function.

This function is called when the kernel considers that the driver should process I/O requests. The function must start processing the requests from the queue, but it is not mandatory to finish them, as requests may be finished by other parts of the driver.

The lock parameter, sent when creating a request queue, is a spinlock that the kernel holds when executing the request method. For this reason, the request function runs in an atomic context and must follow the rules for atomic code (it does not need to call functions that can cause sleep, etc.). This lock also ensures that no other requests for the device will be added to the queue while the request function is running.

Calling the function that processes the request queue is asynchronous relative to the actions of any userspace process and no assumptions about the process in which the respective function is running should be made. Also, it should not be assumed that the buffer provided by a request is from kernel space or user space, any operation that accesses the userspace being erroneous.

Below is presented one of the simplest function of type request_fn_proc:

static void my_block_request(struct request_queue *q)
{
    struct request *rq;
    struct my_block_dev *dev = q->queuedata;

    while (1) {
        rq = blk_fetch_request(q);
        if (rq == NULL)
            break;

        if (blk_rq_is_passthrough(rq)) {
            printk (KERN_NOTICE "Skip non-fs request\n");
            __blk_end_request_all(rq, -EIO);
           continue;
        }

        /* do work */
        ...

        __blk_end_request_all(rq, 0);
    }
}

The my_block_request() function contains a while() loop for iterating through the request queue sent as argument. The operations performed within this loop are:

  • Read the first request from the queue using blk_fetch_request(). As described in Useful functions for processing request queues section, the blk_fetch_request() function retrieves the first item from the request queue and starts the request.
  • If the function returns NULL, it has reached the end of the request queue (there is no remaining request to be processed) and exits my_block_request().
  • A block device can receive calls which do not transfer data blocks (e.g. low level operations on the disk, instructions referring to special ways of accessing the device). Most drivers do not know how to handle these requests and return an error.
  • To return an error, __blk_end_request_all() function is called, -EIO being the second argument.
  • The request is processed according to the needs of the associated device.
  • The request ends. In this case, __blk_end_request_all() function is called in order to complete the request entirely. If all request sectors have been processed, the __blk_end_request() function is used.

struct bio structure

Each struct request structure is an I/O block request, but may come from combining more independent requests from a higher level. The sectors to be transferred for a request can be scattered into the main memory but they always correspond to a set of consecutive sectors on the device. The request is represented as a series of segments, each corresponding to a buffer in memory. The kernel can combine requests that refer to adjacent sectors but will not combine write requests with read requests into a single struct request structure.

A struct request structure is implemented as a linked list of struct bio structures together with information that allows the driver to retain its current position while processing the request.

The struct bio structure is a low-level description of a portion of a block I/O request.

struct bio {
    //...
    struct gendisk          *bi_disk;
    unsigned int            bi_opf;         /* bottom bits req flags, top bits REQ_OP. Use accessors. */
    //...
    struct bio_vec          *bi_io_vec;     /* the actual vec list */
    //...
    struct bvec_iter        bi_iter;
    /...
    void                    *bi_private;
    //...
};

In turn, the struct bio structure contains a bi_io_vec vector of struct bio_vec structures. It consists of the individual pages in the physical memory to be transferred, the offset within the page and the size of the buffer. To iterate through a struct bio structure, we need to iterate through the vector of struct bio_vec and transfer the data from every physical page. To simplify vector iteration, the struct bvec_iter structure is used. This structure maintains information about how many buffers and sectors were consumed during the iteration. The request type is encoded in the bi_opf field; to determine it, use the bio_data_dir() function.

Create a struct bio structure

Two functions can be used to create a struct bio structure:

  • bio_alloc(): allocates space for a new structure; the structure must be initialized;
  • bio_clone(): makes a copy of an existing struct bio structure; the newly obtained structure is initialized with the values of the cloned structure fields; the buffers are shared with the struct bio structure that has been cloned so that access to the buffers has to be done carefully to avoid access to the same memory area from the two clones;

Both functions return a new struct bio structure.

Submit a struct bio structure

Usually, a struct bio structure is created by the higher levels of the kernel (usually the file system). A structure thus created is then transmitted to the I/O subsystem that gathers more struct bio structures into a request.

For submitting a struct bio structure to the associated I/O device driver, the submit_bio() function is used. The function receives as argument an initialized struct bio structure that will be added to a request from the request queue of an I/O device. From that queue, it can be processed by the I/O device driver using a specialized function.

Wait for the completion of a struct bio structure

Submitting a struct bio structure to a driver has the effect of adding it to a request from the request queue from where it will be further processed. Thus, when the submit_bio() function returns, it is not guaranteed that the processing of the structure has finished. If you want to wait for the processing of the request to be finished, use the submit_bio_wait() function.

To be notified when the processing of a struct bio structure ends (when we do not use submit_bio_wait() function), the bi_end_io field of the structure should be used. This field specifies the function that will be called at the end of the struct bio structure processing. You can use the bi_private field of the structure to pass information to the function.

Initialize a struct bio structure

Once a struct bio structure has been allocated and before being transmitted, it must be initialized.

Initializing the structure involves filling in its important fields. As mentioned above, the bi_end_io field is used to specify the function called when the processing of the structure is finished. The bi_private field is used to store useful data that can be accessed in the function pointed by bi_end_io.

The bi_opf field specifies the type of operation.

struct bio *bio = bio_alloc(GFP_NOIO, 1);
//...
bio->bi_disk = bdev->bd_disk;
bio->bi_iter.bi_sector = sector;
bio->bi_opf = REQ_OP_READ;
bio_add_page(bio, page, size, offset);
//...

In the code snippet above we specified the block device to which we sent the following: struct bio structure, startup sector, operation (REQ_OP_READ or REQ_OP_WRITE) and content. The content of a struct bio structure is a buffer described by: a physical page, the offset in the page and the size of the bufer. A page can be assigned using the alloc_page() call.

Note

The size field of the bio_add_page() call must be a multiple of the device sector size.

How to use the content of a struct bio structure

To use the content of a struct bio structure, the structure’s support pages must be mapped to the kernel address space from where they can be accessed. For mapping /unmapping, use the kmap_atomic and the kunmap_atomic macros.

A typical example of use is:

static void my_block_transfer(struct my_block_dev *dev, size_t start,
                              size_t len, char *buffer, int dir);


static int my_xfer_bio(struct my_block_dev *dev, struct bio *bio)
{
    struct bio_vec bvec;
    struct bvec_iter i;
    int dir = bio_data_dir(bio);

    /* Do each segment independently. */
    bio_for_each_segment(bvec, bio, i) {
        sector_t sector = i.bi_sector;
        char *buffer = kmap_atomic(bvec.bv_page);
        unsigned long offset = bvec.bv_offset;
        size_t len = bvec.bv_len;

        /* process mapped buffer */
        my_block_transfer(dev, sector, len, buffer + offset, dir);

        kunmap_atomic(buffer);
    }

    return 0;
}

As it can be seen from the example above, iterating through a struct bio requires iterating through all of its segments. A segment (struct bio_vec) is defined by the physical address page, the offset in the page and its size.

To simplify the processing of a struct bio, use the bio_for_each_segment macrodefinition. It will iterate through all segments, and will also update global information stored in an iterator (struct bvec_iter) such as the current sector as well as other internal information (segment vector index, number of bytes left to be processed, etc.) .

You can store information in the mapped buffer, or extract information.

In case request queues are used and you needed to process the requests at struct bio level, use the rq_for_each_segment macrodefinition instead of the bio_for_each_segment macrodefinition. This macrodefinition iterates through each segment of each struct bio structure of a struct request structure and updates a struct req_iterator structure. The struct req_iterator contains the current struct bio structure and the iterator that traverses its segments.

A typical example of use is:

struct bio_vec bvec;
struct req_iterator iter;

rq_for_each_segment(bvec, req, iter) {
    sector_t sector = iter.iter.bi_sector;
    char *buffer = kmap_atomic(bvec.bv_page);
    unsigned long offset = bvec.bv_offset;
    size_t len = bvec.bv_len;
    int dir = bio_data_dir(iter.bio);

    my_block_transfer(dev, sector, len, buffer + offset, dir);

    kunmap_atomic(buffer);
}

Free a struct bio structure

Once a kernel subsystem uses a struct bio structure, it will have to release the reference to it. This is done by calling bio_put() function.

Set up a request queue at struct bio level

The function blk_init_queue() may specify a function to be used to process requests sent to the driver. The function receives as argument the request queue as queries and carries out processing at struct request level.

If, for flexibility reasons, it is needed to specify a function that carries out processing at struct bio structure level, the function blk_queue_make_request() in conjunction with the blk_alloc_queue() function should be used.

Below is a typical example of initializing a function that carries out processing at struct bio structure level:

// the declaration of the function that carries out processing
// :c:type:`struct bio` structures
static void my_make_request(struct request_queue *q, struct bio *bio);


// ...
// queue creation
dev->queue = blk_alloc_queue (GFP_KERNEL);
if (dev->queue == NULL) {
    printk(KERN_ERR "cannot allocate block device queue\n");
    return -ENOMEM;
}
// the registration of the function that carries out processing
// :c:type:`struct bio` structures
blk_queue_make_request(dev->queue, my_make_request);
dev->queue->queuedata = dev;

Exercises

Important

To solve exercises, you need to perform these steps:

  • prepare skeletons from templates
  • build modules
  • copy modules to the VM
  • start the VM and test the module in the VM.

The current lab name is block_device_drivers. See the exercises for the task name.

The skeleton code is generated from full source examples located in tools/labs/templates. To solve the tasks, start by generating the skeleton code for a complete lab:

tools/labs $ make clean
tools/labs $ LABS=<lab name> make skels

You can also generate the skeleton for a single task, using

tools/labs $ LABS=<lab name>/<task name> make skels

Once the skeleton drivers are generated, build the source:

tools/labs $ make build

Then, copy the modules and start the VM:

tools/labs $ make copy
tools/labs $ make boot

The modules are placed in /home/root/skels/block_device_drivers/<task_name>.

Alternatively, we can copy files via scp, in order to avoid restarting the VM. For additional details about connecting to the VM via the network, please check Connecting to the VM.

Review the Exercises section for more detailed information.

Warning

Before starting the exercises or generating the skeletons, please run git pull inside the Linux repo, to make sure you have the latest version of the exercises.

If you have local changes, the pull command will fail. Check for local changes using git status. If you want to keep them, run git stash before pull and git stash pop after. To discard the changes, run git reset --hard master.

If you already generated the skeleton before git pull you will need to generate it again.

0. Intro

Using LXR find the definitions of the following symbols in the Linux kernel:

  • struct bio
  • struct bio_vec
  • bio_for_each_segment
  • struct gendisk
  • struct block_device_operations
  • struct request

1. Block device

Create a kernel module that allows you to register or deregister a block device. Start from the files in the 1-2-3-6-ram-disk/kernel directory in the lab skeleton.

Follow the comments marked with TODO 1 in the laboratory skeleton. Use the existing macrodefinitions (MY_BLOCK_MAJOR, MY_BLKDEV_NAME). Check the value returned by the register function, and in case of error, return the error code.

Compile the module, copy it to the virtual machine and insert it into the kernel. Verify that your device was successfully created inside the /proc/devices. You will see a device with major 240.

Unload the kernel module and check that the device was unregistered.

Hint

Review the Register a block I/O device section.

Change the MY_BLOCK_MAJOR value to 7. Compile the module, copy it to the virtual machine, and insert it into the kernel. Notice that the insertion fails because there is already another driver/device registered in the kernel with the major 7.

Restore the 240 value for the MY_BLOCK_MAJOR macro.

2. Disk registration

Modify the previous module to add a disk associated with the driver. Analyze the macrodefinitions, my_block_dev structure and existing functions from the ram-disk.c file.

Follow the comments marked with TODO 2. Use the create_block_device() and the delete_block_device() functions.

Hint

Review the Register a disk and Process a request sections.

Fill in the my_block_request() function to process the request queue without actually processing your request: display the “request received” message and the following information: start sector, total size, data size from the current struct bio structure, direction. To validate a request type, use the blk_rq_is_passthrough() (the function returns 0 in the case in which we are interested, i.e. when the request is generated by the file system).

Hint

To retrieve the needed info, review the Requests for block devices section.

Use the __blk_end_request_all() function to finish processing the request.

Insert the module into the kernel and inspect the messages printed by the module. When a device is added, a request is sent to the device. Check the presence of /dev/myblock and if it doesn’t exist, create the device using the command:

mknod /dev/myblock b 240 0

To generate writing requests, use the command:

echo "abc"> /dev/myblock

Notice that a write request is preceded by a read request. The request is done to read the block from the disk and “update” its content with the data provided by the user, without overwriting the rest. After reading and updating, writing takes place.

3. RAM disk

Modify the previous module to create a RAM disk: requests to the device will result in reads/writes in a memory area.

The memory area dev->data is already allocated in the source code of the module using vmalloc() and deallocated using vfree().

Note

Review the Process a request section.

Follow the comments marked with TODO 3 to complete the my_block_transfer() function to write/read the request information in/from the memory area. The function will be called for each request within the queue processing function: my_block_request(). To write/read to/from the memory area, use memcpy(). To determine the write/read information, use the fields of the struct request structure.

Hint

To find out the size of the request data, use the blk_rq_cur_bytes macro. Do not use the blk_rq_bytes macro.

Hint

To find out the buffer associated to the request, use bio_data (rq->bio).

Hint

A description of useful macros is in the Requests for block devices section.

Hint

You can find useful information in the block device driver example from Linux Device Driver.

For testing, use the test file user/ram-disk-test.c. The test program is compiled automatically at make build, copied to the virtual machine at make copy and can be run on the QEMU virtual machine using the command:

./ram-disk-test

There is no need to insert the module into the kernel, it will be inserted by the ram-disk-test command.

Some tests may fail because of lack of synchronization between the transmitted data (flush).

4. Read data from the disk

The purpose of this exercise is to read data from the PHYSICAL_DISK_NAME disk (/dev/vdb) directly from the kernel.

Attention

Before solving the exercise, we need to make sure the disk is added to the virtual machine.

Check the variable QEMU_OPTS from qemu/Makefile. There should already be two extra disks added using -drive ....

If there are not, generate a file that we will use as the disk image using the command: dd if=/dev/zero of=qemu/mydisk.img bs=1024 count=1 and add the following option: -drive file=qemu/mydisk.img,if=virtio,format=raw to qemu/Makefile (in the QEMU_OPTS variable, after the root disk).

Follow the comments marked with TODO 4 in the directory 4-5-relay/ and implement open_disk() and close_disk(). Use the blkdev_get_by_path() and blkdev_put() functions. The device must be opened in read-write mode exclusively (FMODE_READ | FMODE_WRITE | FMODE_EXCL), and as holder you must use the current module (THIS_MODULE).

Implement the send_test_bio() function. You will have to create a new struct bio structure and fill it, submit it and wait for it. Read the first sector of the disk. To wait, call the submit_bio_wait() function.

Hint

The first sector of the disk is the sector with the index 0. This value must be used to initialize the field bi_iter.bi_sector of the struct bio.

For the read operation, use the REQ_OP_READ macro to initialize the bi_opf field of the struct bio.

After finishing the operation, display the first 3 bytes of data read by struct bio structure. Use the format "% 02x" for printk() to display the data and the kmap_atomic and kunmap_atomic macros respectively.

Hint

As an argument for the kmap_atomic() function, just use the page which is allocated above in the code, in the page variable.

For testing, use the test-relay-disk script, which is copied on the virtual machine when running make copy. If it is not copied, make sure it is executable:

chmod +x test-relay-disk

There is no need to load the module into the kernel, it will be loaded by test-relay-disk.

Use the command below to run the script:

./test-relay-disk

The script writes “abc” at the beginning of the disk indicated by PHYSICAL_DISK_NAME. After running, the module will display 61 62 63 (the corresponding hexadecimal values of letters “a”, “b” and “c”).

5. Write data to the disk

Follow the comments marked with TODO 5 to write a message (BIO_WRITE_MESSAGE) on the disk.

The send_test_bio() function receives as argument the operation type (read or write). Call in the relay_init() function the function for reading and in the relay_exit() function the function for writing. We recommend using the REQ_OP_READ and the REQ_OP_WRITE macros.

Inside the send_test_bio() function, if the operation is write, fill in the buffer associated to the struct bio structure with the message BIO_WRITE_MESSAGE. Use the kmap_atomic and the kunmap_atomic macros to work with the buffer associated to the struct bio structure.

Hint

You need to update the type of the operation associated to the struct bio structure by setting the bi_opf field accordingly.

For testing, run the test-relay-disk script using the command:

./test-relay-disk

The script will display the "read from /dev/sdb: 64 65 66" message at the standard output.

6. Processing requests from the request queue at struct bio level

In the implementation from Exercise 3, we have only processed a struct bio_vec of the current struct bio from the request. We want to process all struct bio_vec structures from all struct bio structures. For this, we will iterate through all struct bio requests and through all struct bio_vec structures (also called segments) of each struct bio.

Add, within the ramdisk implementation (1-2-3-6-ram-disk/ directory), support for processing the requests from the request queue at struct bio level. Follow the comments marked with TODO 6.

Set the USE_BIO_TRANSFER macro to 1.

Implement the my_xfer_request() function. Use the rq_for_each_segment macro to iterate through the bio_vec structures of each struct bio from the request.

Hint

Review the indications and the code snippets from the How to use the content of a struct bio structure section.

Hint

Use the struct bio segment iterator to get the current sector (iter.iter.bi_sector).

Hint

Use the request iterator to get the reference to the current struct bio (iter.bio).

Hint

Use the bio_data_dir macro to find the reading or writing direction for a struct bio.

Use the kmap_atomic or the kunmap_atomic macros to map the pages of each struct bio structure and access its associated buffers. For the actual transfer, call the my_block_transfer() function implemented in the previous exercise.

For testing, use the ram-disk-test.c test file:

./ram-disk-test

There is no need to insert the module into the kernel, it will be inserted by the ram-disk-test executable.

Some tests may crash because of lack of synchronization between the transmitted data (flush).