Assignment 2 - Driver UART

• Deadline: Tuesday, 19 April 2022, 23:00
• This assignment can be made in teams (max 2). Only one of them must submit the assignment, and the names of the student should be listed in a README file.

Assignment's Objectives

• consolidating the knowledge of device drivers
• read hardware documentation and track the desired functionality in the documentation
• work with interrupts; use of non-blocking functions in interrupt context
• use of buffers; synchronization
• kernel modules with parameters

Statement

Write a kernel module that implements a driver for the serial port (UART16550). The device driver must support the two standard serial ports in a PC, COM1 and COM2 (0x3f8 and 0x2f8, in fact the entire range of 8 addresses 0x3f8-0x3ff and 0x2f8-0x2ff specific to the two ports). In addition to the standard routines (open, read, write, close), the driver must also have support for changing communication parameters using an ioctl operation (UART16550_IOCTL_SET_LINE).

The driver must use interrupts for both reception and transmission to reduce latency and CPU usage time. Read and write calls must also be blocking. Assignments that do not meet these requirements will not be considered. It is recommended that you use a buffer for the read routine and another buffer for the write routine for each serial port in the driver.

A blocking read call means that the read routine called from the user-space will be blocked until at least one byte is read (the read buffer in the kernel is empty and no data can be read). A blocking write call means that the write routine called from the user-space will be blocked until at least one byte is written (the write buffer in the kernel is full and no data can be written).

Buffers Scheme

Data transfer between the various buffers is a Producer-Consumer problem. Example:

• The process is the producer and the device is the consumer if it is written from the process to the device; the process will block until there is at least one free space in the consumer's buffer
• The process is the consumer and the device is the producer if it is read from a process from the device; the process will block until there is at least one element in the producer's buffer.

Implementation Details

• the driver will be implemented as a kernel module named uart16550.ko
• the driver will be accessed as a character device driver, with different functions depending on the parameters transmitted to the load module:
  • the major parameter will specify the major with which the device must be registered
  • the option parameter will specify how it works:
    • OPTION_BOTH: will also register COM1 and COM2, with the major given by the major parameter and the minors 0 (for COM1) and 1 (for COM2);
    • OPTION_COM1: will only register COM1, with the major major and minor 0;
    • OPTION_COM2: will only register COM2, with the major major and minor 1;
  • to learn how to pass parameters in Linux, see tldp
  • the default values are major=42 and option=OPTION_BOTH.
• the interrupt number associated with COM1 is 4 (IRQ_COM1) and the interrupt number associated with COM2 is 3 (IRQ_COM2)
• the header with the definitions needed for special operations;
• a starting point in implementing read / write routines is the example of uppercase / lowercase character device driver; the only difference is that you have to use two buffers, one for read and one for write;
• you can use kfifo for buffers;
• you do not have to use deferred functions to read / write data from / to ports (you can do everything from interrupt context);
• you will need to synchronize the read / write routines with the interrupt handling routine for the routines to be blocking; it is recommended to use synchronization with waiting queues
• In order for the assigment to work, the default serial driver must be disabled:
  • cat /proc/ioports | grep serial will detect the presence of the default driver on the regions where COM1 and COM2 are defined
  • in order to deactivate it, the kernel must be recompiled, either by setting the serial driver as the module, or by deactivating it completely (this modification is already made on the virtual machine)
    • Device Drivers -> Character devices -> Serial driver -> 8250/16550 and compatible serial support.

Testing

In order to simplify the assignment evaluation process, but also to reduce the mistakes of the submitted assignments, the assignment evaluation will be done automatically with with the help of public tests that are in the new infrastructure. For local testing, use the following commands:

$ git clone https://github.com/linux-kernel-labs/linux.git
$ cd linux/tools/labs
$ LABS=assignments/2-uart make skels
$ #the development of the assignment will be written in the 2-uart directory
$ make build
$ make copy
$ make boot

Tips

To increase your chances of getting the highest grade, read and follow the Linux kernel coding style described in the Coding Style document.

Also, use the following static analysis tools to verify the code:

• checkpatch.pl

$ linux/scripts/checkpatch.pl --no-tree --terse -f /path/to/your/list.c

• sparse

$ sudo apt-get install sparse
$ cd linux
$ make C=2 /path/to/your/list.c

• cppcheck

$ sudo apt-get install cppcheck
$ cppcheck /path/to/your/list.c

Penalties

Information about assigments penalties can be found on the General Directions page.

In exceptional cases (the assigment passes the tests by not complying with the requirements) and if the assigment does not pass all the tests, the grade will may decrease more than mentioned above.

Submitting the assigment

The assignment archive will be submitted to vmchecker, according to the rules on the rules page.

From the vmchecker interface choose the Driver UART option for this assigment.

Resources

• serial port documentation can be found on tldp
• table with registers
• datasheet 16550
• alternative documentation

We recommend that you use gitlab to store your homework. Follow the directions in README and on the dedicated git wiki page.

The resources for the assignment can also be found in the so2-assignments repo on GitHub. The repo contains a Bash script that helps you create a private repository on the faculty GitLab instance. Follow the tips from the README and on the dedicated Wiki page.

Questions

For questions about the assigment, you can consult the mailing list archives or send an e-mail (you must be registered). Please follow and follow the tips for use of the list.

Before you ask a question, make sure that:

• you have read the statement of the assigment well
• the question is not already presented on the FAQ page
• the answer cannot be found in the mailing list archives